Auris
Level 5: Destroyer
Posts: 406
|
Post by Auris on Mar 3, 2005 4:10:13 GMT -5
next ship now on my table ;D there is now a change to build your own ship with me! let me know if somebody do this because i will give then a bit more infos how i handle the parts.
|
|
|
|
Post by xtron on Mar 3, 2005 17:34:52 GMT -5
yeah!!! ;D ;D ;D ;D ;D ;D ;D ;D ;D
send me files
need imput
will print immediately
|
|
|
|
Post by TheGlove on Mar 3, 2005 18:21:57 GMT -5
u have frucs site ya know...
|
|
|
|
Post by xtron on Mar 3, 2005 19:57:35 GMT -5
but his is 2 feet tall
|
|
|
|
Post by gstealer on Mar 3, 2005 20:04:08 GMT -5
And it builds up really nice... I sent pics of mine to Frutose to post.... and posted a couple < here> too |
|
|
|
Post by TheGlove on Mar 3, 2005 20:10:27 GMT -5
dude, its pdo, u can scale it down
|
|
Raven
Level 6: Carrier
Beware the quiet ones
Posts: 948
|
Post by Raven on Mar 3, 2005 22:01:34 GMT -5
I think I will follow you with this one. I tryed that one and kinda lost it. I can make that one my home project cause i've qued the kushan mine layer and the sawmtaww destroyer for any free time at school.
|
|
Auris
Level 5: Destroyer
Posts: 406
|
Post by Auris on Mar 4, 2005 3:03:07 GMT -5
o.k. here we start then ;D Use 160 gr. Cardboard to print. If you can, print the pdo in A4 (or regular US) format! You get a very good result in Colours if you print it in a copy shop with a digital laser printer! To give the ship a better look, colour all cut edges! Clue cardboard inside as shown on the pics. make all cuts in the middle of the lines. for _._._ lines use a needle to make little holes on the line. so its very easy to graze? the fold lines behind. open the pdo file and use right click mouse and set "check corresponding surface" to get an better idea where all the pices going in the model. Green lines = Clue Blue = Cut Red Dot = clue cardboard behind (i use comicboards) Yellow Dot – Cardboard you maybe need later to clue behind a pice. (its depend of having enaug space to clue later) Main Door Hangar  Its very important to clue cardboard behind to stabilize and give the pice the correct form. Inner Main Hangercut along the foldlines 0,2mm outside from the middle of the fold line around where the inner hangar goes in. After cluing the inner hangar test if its fit into the “ring”. Bow the flaps of the inner ring in 180 degree. Turn outside part on head. Put clue around inner part and clue the parts together. After its dry clue the outside parts together. Clue cardboard behind where you see the red dots    |
|
Raven
Level 6: Carrier
Beware the quiet ones
Posts: 948
|
Post by Raven on Mar 5, 2005 0:21:39 GMT -5
If only my brother hadent squished what I started before  id be with you. in fact when I had started with those 2 parts in that order ;D |
|
|
|
Post by xtron on Mar 5, 2005 18:03:12 GMT -5
|
|
Raven
Level 6: Carrier
Beware the quiet ones
Posts: 948
|
Post by Raven on Mar 6, 2005 22:40:55 GMT -5
Failed to hadel with care. dident matter much anyway. som of it wasent printed cause it was out of the ink margine.
|
|
Auris
Level 5: Destroyer
Posts: 406
|
Post by Auris on Mar 7, 2005 5:01:08 GMT -5
Fighter/Supply HangarParts you need for this.  clue inner box  leave enaugh space beetween cardboard pices and edges where you clue later the flaps of the top and bottom pices in.   1 – Clue first, wait until its dry, then clue 2 
|
|
|
|
Post by TheGlove on Mar 7, 2005 11:10:51 GMT -5
man, this looks so nice
|
|
|
|
Post by xtron on Mar 7, 2005 18:51:32 GMT -5
very nice indeed
|
|
Auris
Level 5: Destroyer
Posts: 406
|
Post by Auris on Mar 9, 2005 9:07:36 GMT -5
|
|
id be with you. in fact when I had started with those 2 parts in that order ;D
