Post by Auris on Dec 9, 2005 5:55:55 GMT -5
Long time ago from my last pic A.I. Well my warhammer ork armee is nearly finished and i hate all the green! ;D
Use 160 gr. Cardboard to print. If you can, print the pdo in A3. You get a very good result in
Colours if you print it in a copy shop with a digital laser printer!
To give the ship a better look, colour all cut edges! Clue cardboard inside as shown on the pics.
make all cuts in the middle of the lines. for _._._ lines use a needle to make little holes on the line. so its very easy to graze? the fold lines behind.
open the pdo file and use right click mouse and set
"check corresponding surface" to get an better idea where all the pices going in the model.
Green lines = Glue Blue lines = Cut Red Dot = Glue cardboard behind (i use comicboards)
Yellow Dot – Cardboard you maybe need later to clue behind a pice. (its depend of having enaug space to glue later)
Main Hangar
Pics deleted 26.12.2006
complete Pic A.I. at:
www.ericksmodels.com/paper/models/models.html
Use 160 gr. Cardboard to print. If you can, print the pdo in A3. You get a very good result in
Colours if you print it in a copy shop with a digital laser printer!
To give the ship a better look, colour all cut edges! Clue cardboard inside as shown on the pics.
make all cuts in the middle of the lines. for _._._ lines use a needle to make little holes on the line. so its very easy to graze? the fold lines behind.
open the pdo file and use right click mouse and set
"check corresponding surface" to get an better idea where all the pices going in the model.
Green lines = Glue Blue lines = Cut Red Dot = Glue cardboard behind (i use comicboards)
Yellow Dot – Cardboard you maybe need later to clue behind a pice. (its depend of having enaug space to glue later)
Main Hangar
Pics deleted 26.12.2006
complete Pic A.I. at:
www.ericksmodels.com/paper/models/models.html
